3D Printed mounting system for the Gilbert Engineering Hattitude Quartet. The mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces as well as provide rigidity to the prop after it has been slit in half for shipping. The STL comes with the files to make either 1/2″ EMT conduit or 1/2″ PVC pipe versions (EMT is recommended for strength) and are designed to be zip tied to the coro. The conduit slides through the mounts with the center junction utilizing a 1/2″ PVC cross which on the EMT version allows the smaller EMT conduit to pass through with the included bushing file. The conduit is then secured to the mounts using screws to lock the mounting frame in place to the prop. If your prop has the reenforcing backer plates, the two side backer plates are not used with these mounts and may be discarded.

Note: This is a digital purchase for STL files and not a physical product.